Leica R9 Betriebsanleitung PDF herunterladen (Seite 181)

175

High speed sync flash with the flash unit’s

TTL HSS

mode

For TTL controlled fill-in flash exposures (with

preset –1

EV compensation) in conjunction

with selectively metered pre-flash/es.

Note:

If the shutter is released before firing a pre-flash,

depending on the manually or automatically set

shutter speed either no flash at all will be fired -

with speeds shorter than 1/250s, or, with

speeds within the normal sync range, the camera

will trigger a TTL-controlled flash instead of a

high-speed sync flash.

The settings in detail:

1. Set exposure mode dial (1.11) to the m or A

position

2. Set the shutter speed dial (1.16) to the desired

value in m (1/350s or faster); the setting is

ineffective in

3. Set the aperture setting ring (1.12) to the de-

sired value (preferably large apertures, i.e. low

values; the highest available value in this

mode is 5.6)

4. Set the exposure metering method selector

(1.15) to the desired method

5. To power up the camera, lightly tap the shutter

release (1.17)

6. Set

TTL HSS

on the flash unit

Displays:

Unlike the normal flash mode, the minus sign

(2.5) appears in the viewfinder to the right of the

flash symbol, the shutter speed and can be

seen alternately (2.9a/d) and the symbol for

selective metering (2.3c) flashes to indicated

that a pre-flash has to be fired to determine the

flash exposure.

The flash unit display shows the maximum range

for this flash mode.

Note:

If higher values than 5.6 are set, the selected

exposure metering mode appears again instead

of the flashing selective point and no longer

alternates with the shutter speed display to indi-

cate that pre-flash firing and therefore

HSS

mode are not possible. 

1 2 ... 176 177 178 179 180 181 182 183 184 185 186 ... 209 210

Kommentare zu diesen Handbüchern

Keine Kommentare

Leica R9 Betriebsanleitung Seite 181

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kamera Blitze Leica R9