Leica M-P (Typ 240) Betriebsanleitung PDF herunterladen (Seite 229)

225

Additional functions

INSTALLING FIRMWARE UPDATES

Leica is constantly working on developing and optimizing its

products. As many functions of the camera are entirely controlled

by software, some of these improvements and extended functions

can be installed at a later date.

Leica provides ﬁrmware updates at irregular intervals for this

purpose.

Information about any resulting changes or additions to the details

in this manual can be found on our website.

To check whether your camera is running the latest ﬁrmware

version, select

Firmware (page 5, SETUP section) in the menu.

You can download new ﬁrmware from our website and transfer it to

your camera:

1. Format a memory card in the camera.

2. Turn oﬀ the camera and insert the card into an SD/SDHC/

SDXC card reader – either integrated or connected to your

computer.

3. Download the ﬁrmware ﬁle from the camera page using the

“UPDATES” link.

4. Save the ﬁle m-X_xxx.upd at the top level of the card's folder

structure. X_xxx stands for the relevant version.

5. Remove the card from your card reader and insert it in the

camera. Close the bottom cover and turn the camera on.

6. Hold down the INFO button (32) and turn on the camera.

The update process begins. This can take up to 15 minutes.

Note:

If the battery does not have suﬃcient charge, the warning message

Battery low appears. In this case, ﬁrst charge the battery and

then repeat the process described above.

1 2 ... 224 225 226 227 228 229 230 231 232 233 234 ... 260 261

Keine Kommentare

Leica M-P (Typ 240) Betriebsanleitung Seite 229