Leica M-P (Typ 240) Betriebsanleitung PDF herunterladen (Seite 155)

151

Camera operation

Note:

If the camera is out of use for an extended period or is stored in a

case, always turn it oﬀ at the main switch. This prevents any power

consumption, including that which continues to occur in standby

mode after the exposure meter is turned oﬀ automatically and the

display is extinguished. This also prevents pictures from being

taken accidentally.

THE SHUTTER RELEASE BUTTON

The shutter button (17) has two pressure points:

1. Pressing down to the 1st pressure point

– activates exposure metering and the viewﬁnder display

– saves the metered exposure value in aperture priority mode, i.e.

the shutter speed determined by the camera (for more details,

refer to the “Metering memory lock” section on p. 185)

– restarts a self-timer delay time that is already in progress

(see p. 200)

If the shutter button is kept at this pressure point, the displays

remain visible, or if the camera had previously been set to review

mode, it switches back into picture mode. If the camera had

previously been in stand-by mode, it will be reactivated and the

displays switched on.

If you let go of the shutter button, the metering system and the

displays remain activated for around a further 12s (for more details,

refer to the sections on p. 182).

Note:

The shutter button remains blocked

– if the internal buﬀer memory is (temporarily) full, e.g. after a

series of ≥16 pictures, or

– if the memory card inserted and the internal buﬀer memory are

(temporarily) full, or

– if the battery has exceeded its performance limits (capacity,

temperature, age)

2. Pressing the shutter button all the way down takes the picture

or starts a preselected self-timer delay time. The data is then

transferred to the memory card.

The shutter button has a standard thread (17a) for a cable release.

Notes:

• If review mode (see p. 206) or menu control (see p. 154) had

been activated, pressing the shutter button causes the camera

to switch immediately into picture mode.

• To avoid wobble, the shutter button should be pressed gently,

not jerkily, until the shutter is released with a soft click.

• The shutter button can be pressed to take one or more individual

pictures while a video recording is in progress. Details of video

recordings and the video shutter button (18) can be found on

p.198.

1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 260 261

Kommentare zu diesen Handbüchern

Keine Kommentare

Leica M-P (Typ 240) Betriebsanleitung Seite 155

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Brückenkameras Leica M-P (Typ 240)