Leica M Monochrom Bedienerhandbuch PDF herunterladen (Seite 111)

109

The Leica M Monochrom shutter speed setting dial is

used to select the three exposure control modes,

– Aperture priority mode by selecting the

A position, marked in red (see p. 124)

– Manual mode by selecting a shutter speed of between

4000

s and 8s, (intermediate values in

step graduations are also available, see p. 128)

as are

– the shortest possible sync speed for flash mode -

marked with the

symbol - of

180

s (see p. 130),

and

–

for long exposures (see p. 128).

The Leica M Monochrom shutter speed setting dial has

no stop, i.e. it can be turned in either direction from

any position. It detents at all marked positions and at

the intermediate values. Values between the detent

positions cannot be used.

Notes:

• As described in connection with the ISO settings

on p. 116, when using higher sensitivities and

in particular with dark, even surfaces, a certain

amount of noise will become apparent. To reduce

this annoying phenomenon, after pictures with slow

shutter speeds the Leica M Monochrom automatically

takes a second “black picture” (taken with the shutter

closed). The noise present in this parallel picture is

then digitally “subtracted” from the data set for the

real picture.

• This doubling of the “exposure” time can be

significant at longer exposure times, and must be

allowed for. During this time the camera should not

be turned off.

• At shutter speeds of more than 2s, the

Noise

reduction 12s

message appears in the monitor.

• If the

B function is used in conjunction with the

self-timer (see p. 147), there is no need to keep

the shutter release button pressed; the shutter

will remain open until the shutter release button is

pressed a second time (this is then equivalent to the

T function).

More details on setting the correct exposure can be

found in the sections under: “Exposure metering” from

p. 123.

Time is an example

MONITOR

The Leica M Monochrom has a 2.5” liquid crystal color

monitor (1.32).

It is used for:

- Displaying some basic settings in picture mode.

Pressing the

INFO

button (1.22) allows you to display

the battery and memory card capacities, and some

additional settings (see p. 141).

- The menu (see next page).

- Viewing the pictures taken on the memory card.

Review mode (see p. 138) is activated using the

PLAY

button (1.26) or automatically by selecting the Auto

review

function.

The monitor on the Leica M Monochrom is protected

by an extremely hard and scratch-resistant sapphire

glass cover.

Setting the brightness

The brightness of the monitor picture can be adjusted

to five different levels using the menu control, so that

you can select the optimum brightness for any situati

on, i.e. the ambient lighting conditions.

Setting the function

1. In the main menu (see p. 97/109), select Monitor

brightness

(4.1.11), and

2. then the required level (

Low, Medium low, Standard,

Medium high, High) in the submenu.

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 169 170

Kommentare zu diesen Handbüchern

Keine Kommentare

Leica M Monochrom Bedienerhandbuch Seite 111

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kamera Blitze Leica M Monochrom