Leica M Monochrom Bedienerhandbuch PDF herunterladen (Seite 157)

155

MONITOR

The monitor is manufactured using a high-precision

process. This ensures that, of the total of around

230,000 pixels, more than 99.995% work correctly and

only 0.005% remain dark or are always light. However,

this is not a malfunction and it does not impair the

reproduction of the picture.

• If the Leica M Monochrom is exposed to significant

temperature fluctuations, condensation can form on

the monitor. Wipe it carefully with a soft dry cloth.

• If the Leica M Monochrom is very cold when it is

turned on, the displays may at first appear darker

than usual. As soon as it warms up, it will reach its

normal level of brightness.

SENSOR

Cosmic radiation (e.g. on flights) can cause pixel

defects.

CONDENSATION

If condensation has formed on or in the Leica M

Monochrom, you should turn it off and leave it to stand

at room temperature for around an hour. Once the

camera temperature has adjusted to room temperature,

the condensation will disappear by itself.

CARE INSTRUCTIONS

As any soiling also represents a growth medium for

microorganisms, you should take care to keep the

equipment clean.

FOR THE CAMERA

• Only clean the Leica M Monochrom with a soft, dry

cloth. Stubborn dirt should first of all be covered with

a well-thinned cleaning agent and then wiped off with

a dry cloth.

• To remove stains and fingerprints, the camera and

lens should be wiped with a clean lint-free cloth.

Tougher dirt in hard to reach corners of the camera

body can be removed with a small brush. Be careful

not to damage the shutter blades, for instance with

the shaft of the brush.

• All mechanical moving bearings and sliding surfaces

on your Leica M Monochrom are lubricated. Please

remember this if you will not be using the camera

for a long period of time. To prevent the lubrication

points becoming gummed up, the camera shutter

should be released a number of times every three

months. It is also recommended that you repeatedly

move and use all other controls, such as the image

field selector. The distance and aperture setting rings

on the lens should also be moved periodically.

• Take care not to scratch the sensor for the 6-bit

coding (1.10) in the bayonet fastening, or to get it

dirty. Take care also that no grains of sand or similar

particles enter the fastening, where they could

scratch the bayonet. Never wet this component when

cleaning it!

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 169 170

Kommentare zu diesen Handbüchern

Keine Kommentare

Leica M Monochrom Bedienerhandbuch Seite 157

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kamera Blitze Leica M Monochrom