Leica M Monochrom Bedienerhandbuch Seite 105

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 170
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 104
103
INSERTING AND REMOVING THE MEMORY CARD
The Leica M Monochrom saves picture data on an
extremely compact SD (secure digital) or SDHC (high
capacity) card.
SD/SDHC memory cards are small, light and
interchangeable external storage media. SD/SDHC
memory cards, particularly those with a high capacity,
provide significantly faster read/write times and
significantly faster recording and review of the data.
An SD card has a write protection switch, which can
be used to prevent unintentional storage and deletion
of pictures. This switch takes the form of a slider on
the non-beveled side of the card; in the lower position,
marked LOCK, the data on the card is protected.
SD/SDHC memory cards are available from various
suppliers and with different capacities and read/write
speeds.
Note:
Do not touch the memory card contacts.
1. Set the main switch (1.18) to
OFF
.
2. Remove the bottom cover (1.35) of the camera. To
do this:
a. Flip up the toggle (1.36) in the bottom cover,
b. Turn it to the left as far as the stop, and
c. Lift off the bottom cover.
3. Insert the memory card into the slot (1.42) with the
contacts at the back and with the beveled corner
pointing downwards. Slide it completely into the slot
against the spring resistance until you hear it click
into place.
4. Replace the bottom cover. To do this:
a. Insert it into the retaining clip (1.9) on the side
of the camera
b. Swing it down,
c. Lock it by turning the toggle to the right as far as
the stop, and
d. Push the toggle back down.
To remove the memory card, switch off the camera
and follow this procedure in reverse order. To release,
the card must first be pressed slightly further in – as
indicated on the base of the camera.
Notes:
The range of SD/SDHC cards is too large for Leica
Camera AG to be able to completely test all available
types for compatibility and quality. Therefore, we
recommend using a card such as the "Extreme III"
cards from the leading brand "SanDisk".
Although using other card types is not likely to
damage the camera or the card, some "no name"
cards do not comply with the SD and SDHC
standards, and Leica Camera AG is unable to provide
any guarantee that they will function correctly.
If the memory card cannot be inserted, check that it
is aligned correctly.
If you remove the bottom cover or take out the
memory card, the monitor displays the corresponding
warning messages instead of the normal display:
- Attention Bottom cover removed
-
Attention No memory card
Seitenansicht 104
1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 169 170

Kommentare zu diesen Handbüchern

Keine Kommentare