Leica M Monochrom Bedienerhandbuch PDF herunterladen (Seite 153)

151

INSTALLING FIRMWARE UPDATES

Leica is constantly working on developing and

optimizing its products. As digital cameras have many

functions that are controlled electronically, some

of these improvements and enhancements to the

functions can be installed on the camera at a later date.

To do this, Leica provides firmware updates at irregular

intervals, which you can easily download from our

homepage to your camera yourself:

1. Format a memory card in your

Leica M Monochrom (see p. 147).

2. Turn off the camera and insert the card into an SD/

SDHC card reader – either integrated or connected

to your computer. (A reader is required for Firmware

updates).

3. Download the Firmware file from the Leica M

Monochrom site using the “UPDATES” link.

4. Save the file Mm-X_xxx.upd at the top level of the

card's folder structure. X_xxx stands for the relevant

version.

5. Remove the card properly from your card reader,

insert the card into the camera and close the bottom

cover. Turn on the camera using the main switch.

6. Confirm the prompt that appears in the monitor as

to whether you want to update the Firmware on the

camera to version X.xxx.

The update process takes around 180s. You will then

be prompted to restart the camera using the main

switch.

7. Turn the camera off and back on again.

Notes:

• If the battery does not have sufficient charge, you will

see a corresponding warning message.

• The firmware version currently being used on the

camera can be displayed by selecting

Firmware

(4.1.26) in the menu.

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 169 170

Keine Kommentare

Leica M Monochrom Bedienerhandbuch Seite 153