Leica M Monochrom Bedienerhandbuch PDF herunterladen (Seite 167)

165

Displays

In the viewfinder (At bottom edge) LED symbol for

flash status. Four-digit seven-segment digital display

with dots above and below, display brightness adjusted

for ambient brightness, for: Warning of exposure

compensation, display for automatically generated

shutter speeds in aperture priority mode, indication

of use of exposure lock, warning that the metering or

setting ranges are overshot or undershot using aperture

priority and counting down exposure times longer than

2s.

LED light balance with two triangular and one central

circular LED for manual setting of exposures. The

triangular LEDs give the direction of rotation of the

aperture setting ring and shutter speed setting dial to

adjust the exposure. Also warns if the metering range is

overshot or undershot.

On rear panel 2.5” monitor (color TFT LCD) with

230,000 pixels, for displays see p. 95.

Viewfinder

Viewfinder principle Large, bright line frame

viewfinder with automatic parallax compensation.

Eyepiece Adjusted to –0.5 dptr. Corrective lenses

from –3 to +3 dpt. available.

Image field limitation By displaying

two bright line frames: For 35 and 135mm, or for 28

and 90mm, or for 50 and 75mm. Automatic activation

when lens is screwed in. Any desired pair of bright line

frames can be activated using the image field selector.

Parallax compensation The horizontal and vertical

difference between the viewfinder and the lens is

automatically compensated according to the relevant

distance setting, i.e. the viewfinder bright line frame

automatically aligns with the subject detail recorded by

the lens.

Matching of viewfinder and actual image The

size of the bright-line frame corresponds to the sensor

size of 23.9 x 35,8mm at a setting distance of 1 meter.

At infinity setting, depending on the focal length,

approx. 7.3% (28mm) to 18% (135mm) more is recorded

by the sensor than indicated by the corresponding

bright line frame and slightly less for shorter distance

settings than 1m.

Magnification (For all lenses) 0.68.

Large basis rangefinder Split or superimposed

image range finder shown as a bright field in the center

of the viewfinder image.

Effective measurement basis 47.1mm

(mechanical measurement basis 69.25mm x viewfinder

magnification 0.68x).

Flash exposure control

Flash unit connection Via accessory shoe with

center and control contacts.

Synchronization Choice of 1st or 2nd shutter

curtain.

Flash sync speed

180

s; slower shutter

speeds can be used.

Flash exposure metering (with SCA-3501/3502

adapter or SCA-3000 standard flash unit, e.g. Leica SF

24D / Leica SF 58) Control with center-weighted TTL

pre-flash metering.

Flash measurement cell 2 silicon photo diodes with

collection lens on the camera base.

Flash exposure compensation ±3

EV in

increments, adjustable on SCA-3501/3502 adapter.

On Leica SF 24D ±3EV in

EV increments or from 0

to –3EV in 1EV increments adjustable with computer

control / on Leica SF 58 ±3EV in

EV increments in

all modes.

Displays in flash mode Ready: Flash LED in

viewfinder continuously lit; Success confirmation: LED

remains lit or flashes rapidly for a while after taking the

picture; underexposure indicated by the LED going out

for a while.

1 2 ... 162 163 164 165 166 167 168 169 170

Kommentare zu diesen Handbüchern

Keine Kommentare

Leica M Monochrom Bedienerhandbuch Seite 167

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kamera Blitze Leica M Monochrom